Marble Ultrasonic Diffuser

As the temperature drops, the moisture escapes from the air. This mean dry skin is on the horizon.

Keep your home moist and relaxed with our marble ultrasonic diffuser. 

Inside of each unit, there is a tiny ceramic disc that vibrates at a high frequency to generate a cool, odourless water vapour, kinda like the mist you get beside a waterfall. Add some essential oils into the mix and this vibration disperses a fine mist infused with the oils' natural soothing aromas. Take a deep breath and let go of stress and anxiety.

Tank capacity 200ml

Plug in for power

Instruction:

1. Take off the top cover and inner tank lid of the diffuser to open up the water reservoir inside the unit.

2. Fill the exposed reservoir with water (preferably filtered) using a measuring cup or similar so it fills up the reservoir anywhere before the max fill line.

3. Add a few drops (6-12) of your preferred essential oil aroma(s) into the water and give it a good stir with your finger to disperse the oil evenly across the surface.

4. Put the inner tank lid and top cover back on the diffuser to close it off. Make sure the top cover is snugly on the unit in order to seal the airflow for the mist to form.

5. Lightly tap the Mist button on the front of the unit to power it on. Watch the mist flow out as your soothing essential oil aroma fills the air.

Note: It may take 5-10 minutes for the mist to reach its fullest strength, so be patient!